Fast cooling

• Media temperature control MT: Highly flexible, robust media probe for precise control of sterilisation time
• Easily exchangeable in the case of service

• Monitoring of sensor break and short circuits
• Cooling water consumption: 15 to 40 litres

RM rapid cooling module
for sterilisation of liquids in open vessels

• Integrated stainless steel water jacket provides cooling without reducing autoclave capacity
• Media temperature control MT and media temperature sensor included
• Cooling times reduced by up to 40%
• Advantageous for thermally unstable media, adjustable withdrawal temperature

RG rapid cooling module
for sterilisation of liquids in open and hermetically-closed vessels

• Integrated stainless steel water jacket, ventilator fan and counter pressure system with sterile compressed air
• Media temperature control MT and media temperature sensor included
• For rapid, secure cooling of pressure-tight closed vessels, too
• Ultra-fast cooling times for open and lightly closed vessel sterilisation
• Advantageous for thermally unstable media, adjustable withdrawal temperature

Pre-vacuum and drying

VF module fractionated pre-vacuum
for thorough deaeration before sterilisation

• Single pre-vacuum or fractionated pre-vacuum cycle completely removes atmosphere to enhance steam penetration and improve the sterilisation quality
• Adjustable vacuum levels and pressure cycling allows economic processes for complete deaeration

VT module vacuum drying
prevents re-contamination after sterilisation

• After-sterilisation, deep vacuum drying with powerful double wall heating eliminates moisture
• Chamber is uniformly heated from the outside, followed by sterile venting to prevent re-contamination

Emission-free sterilisation

• Sterile disposal of potentially infectious laboratory waste in risk group 2 to 4
• Sterile disposal of genetically modified material from 2 to 4 security level laboratories
• Safe sterilisation of infectious material or pathogens from the clinical area
• Steam heated double jacket made of stainless steel enables exact temperature control of the sterilisation chamber

• Short steam paths ensure complete sterilisation including the filter
• Easy-to-exchange filter, ensures sterility after each use, not penetrated by sprout
• Can be combined with cooling modules as well as vacuum and drying processes

FA module for exhaust-air filtration
with condensate sterilisation
for safe sterilisation of hazardous materials

• Aerosols contained in exhaust air are retained by a filter prior to sterilisation
• Simultaneous sterilisation of chamber contents, collected condensate and filter housing
• Sterilisation chamber with bottom respectively back are evenly steam heated from outside
• Drain valve in the chamber floor has no inaccessible spaces and thereby guarantees a complete sterilisation and removal of the condensate
• Safety shut-down in the event of supply media failure or program termination before sterilisation cycle

Process documentation

GLP batch printer
for compliance through simple data recording

• Process steps, start/stop times, chamber/reference temperatures,
  chamber pressure and any alert alarms are registered
• Records digitally process data of the controller
• Recommended for routine procedures and security level 2 laboratories

GMP batch printer
for compliance through the
independent measuring system I-M-S

• Process steps, start/stop times, chamber/reference temperatures,
  chamber pressure, and any alert alarms are registered
• Temperature and pressure data from independent reference sensors
  calibrated to ISO 9000 standards are registered and displayed
• Recommended for demanding applications, pharmaceutical manufacturing and risk group 3 waste